Phrozen TR300 Ultra-High Temp Resin

Phrozen’s TR300 Resin comes with extreme high thermal resistance, high mechanical strength, and with a certain toughness, making it ideal for high temperature applications such as dental thermoforming and industrial mock-ups.

Specifically designed for a 405 nm LCD 3D printer, TR300 Resin takes only 1.3 sec. to cure while printing with Phrozen’s Sonic Series 3D printers.

Size: 1 kg

Specification:

• Volume: 1 kg per bottle
• Recommended Layer Height: 30-100 um
• Way to Clean: Use alcohol spray to clean and air-gun to dry it. Avoid immersion to alcohol for over 30 seconds
• Performance:
  • Viscosity: 160 cps at 25 °C
  • Density: 1.1 g/cm³
  • Tg (Glass Transition Temperature)：220 °C
  • Tensile Elongation at break: 2 %
  • Tensile Strength at break: 32 MPa
  • Tensile Modulus: 1850 MPa
  • Surface Hardness: Shore 80D
  • Pencile Hardness: 5H at 500 g load)
  • IZOD notched Impacted Strength: 8 kJ/m²

Precautions:

• Use and preserve resins in room temperature, dark, and ventilated condition.
• Shake well before use.
• When print finishes, keep used resins in closed & opaque bottle. Avoid mixing used resin with fresh one.
• Keep resin away from kids and away from direct sun-light exposure.
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cured it and treat it as general plastic garbage.